Heat Sealers, Shrink Film Systems & Accessories

Heat sealers for perfect sealing of PE/PP/PVC films; plus shrink film, layflat tubing and sealing tongs.

Optimax® C-type and heavy duty S-type impulse heat sealers are designed for higher volume usage.

A guide to shrink film:

  • Polyolefin is preferred for its low odour, higher seal strength, better temperature resistance and dimensional stability. It is, however, more expensive than PVC and less compatible with automated shrink wrap systems.
  • PVC is preferred for its low cost and higher film clarity, but requires fume extraction during the shrinking process and becomes brittle at lower temperatures.

Economical portable I-bar sealers

Pacplus® Economical Portable I-bar Sealers

Two models available - for film widths up to 450mm & 800mm

NB. Requires Hot Air Gun HAB1500 (not included)

CODE: Various

Portable I-bar sealer maintenance kits

Pacplus® Portable I-bar Sealer Maintenance Kits

Two models available, containing element wire, teflons & fuse

CODE: Various

L-bar heat sealer LBS300

Pacplus® L-bar Heat Sealer

For 300mm wide PVC shrink film

Shown with: 300WB film unroller, HAB1500 hot air gun, HABSTD hot air gun stand, shrink film (all ordered separately)

CODE: LBS300

Hot air shrink gun HAB1500

Pacplus® Hot Air Shrink Gun

Low-cost electrically powered heat shrink gun for PVC shrink film

CODE: HAB1500

Hot air gun stand HABSTD

Pacplus® Hot Air Gun Stand

Holds the HAB1500 at a convenient angle for repeat use

CODE: HABSTD

Hand-held heat sealers

Pacplus® Hand-held Heat Sealers

Portable heat sealing for items too large for bench mounted sealers

CODE: Various

Automatic impulse heat sealers

Pacplus® Automatic Impulse Heat Sealers

Heavy duty impulse heat sealers for higher volume manual sealing

CODE: Various

Automatic impulse heat sealers maintenance kits

Pacplus® Automatic Impulse Heat Sealers Maintenance Kits

Two models available, containing elements, teflons & silicon pads

CODE: Various

Constant heat sealers

Pacplus® Constant Heat Sealers

Two models available - for film widths 300mm & 600mm

CODE: Various

Impulse heat sealers

Pacplus® Impulse Heat Sealers

Selection of models available - for film widths 200mm to 500mm

CODE: Various

Impulse heat sealers maintenance kits

Pacplus® Impulse Heat Sealers Maintenance Kits

Spare parts kits for IS-type impulse heat sealers

CODE: Various

PVC shrink film system

Pacplus® PVC Shrink Film System

Contains round wire sealer, hot air gun and film unroller

CODE: PSFS400

Round wire impulse heat sealer IS400RW

Pacplus® Round Wire Impulse Heat Sealer

Single bar impulse heat sealer with integral film unroller and separator bar

CODE: IS400RW

Round wire impulse heat sealer maintenance kit RW400KIT

Pacplus® Round Wire Impulse Heat Sealer Maintenance Kit

For IS400RW - containing element wires & teflons

CODE: RW400KIT

Polythene layflat tubing

Pacplus® Polythene Layflat Tubing

Rapidly create and seal bespoke polybag sizes on demand

NB. Film holder/heat sealer not included

CODE: Various

Anti-static layflat tubing

Pacplus® Anti-static Layflat Tubing

Pink tinted layflat tubing with anti-static qualities

CODE: Various

Polyolefin shrink film

Pacplus® Polyolefin Shrink Film

Approved for food industries and cold storage

CODE: Various

PVC shrink film

Pacplus® PVC Shrink Film

High film clarity with low shrink temperature

CODE: Various

Layflat tubing dispenser TLD40

Pacplus® Layflat Tubing Dispenser

Adjustable from 400mm - 1050mm

CODE: TLD40

Film unrollers

Pacplus® Film Unrollers

Bench mounted film holders and dispensers for three roll widths

NB. Film not included

CODE: Various

C-Type 220mm Heat Sealer

Optimax® C-Type 220mm Heat Sealer

Powder coated aluminium semi-automatic impulse heat sealer with integral film cutter

CODE: C220

CI-Type 220mm Heat Sealer

Optimax® CI-Type 220mm Heat Sealer

Stainless steel semi-automatic impulse heat sealer with integral film cutter

CODE: CI-220

C-Type 320mm Heat Sealer

Optimax® C-Type 320mm Heat Sealer

Powder coated aluminium semi-automatic impulse heat sealer with integral film cutter

CODE: C320

CI-Type 320mm Heat Sealer

Optimax® CI-Type 320mm Heat Sealer

Stainless steel semi-automatic impulse heat sealer with integral film cutter

CODE: CI-320

C-Type 420mm Heat Sealer

Optimax® C-Type 420mm Heat Sealer

Powder coated aluminium semi-automatic impulse heat sealer with integral film cutter

CODE: C420

CI-Type 420mm Heat Sealer

Optimax® CI-Type 420mm Heat Sealer

Stainless steel semi-automatic impulse heat sealer with integral film cutter

CODE: CI-420

C-Type 620mm Heat Sealer

Optimax® C-Type 620mm Heat Sealer

Powder coated aluminium semi-automatic impulse heat sealer with integral film cutter

CODE: C620

CI-Type 620mm Heat Sealer

Optimax® CI-Type 620mm Heat Sealer

Stainless steel semi-automatic impulse heat sealer with integral film cutter

CODE: CI-620

C-Type 820mm Heat Sealer

Optimax® C-Type 820mm Heat Sealer

Powder coated aluminium semi-automatic impulse heat sealer with integral film cutter

CODE: C820

C-Type Spares Kits

Optimax® C-Type & CI-Type Spares Kits

Replacement wearing parts for the above type Optimax® impulse heat sealers

CODE: Various

C-Type Replacement Parts

Optimax® C-Type & CI-Type Replacement Parts

Compatible with all of the above type Optimax® impulse heat sealers

CODE: Various

Work Tables and Film Holders

Optimax® C-Type & CI-Type Work Tables & Film Holders

Turns C-Type impulse heat sealers into complete sealing systems

CODE: Various

S-Type 420mm Heat Sealer

Optimax® S-Type 420mm Heat Sealer

Heavy duty impulse heat sealer with integral cutter, locking sealing bar and remote actuation option

CODE: S420

S-Type 620mm Heat Sealer

Optimax® S-Type 620mm Heat Sealer

Heavy duty impulse heat sealer with integral cutter, locking sealing bar and remote actuation option

CODE: S620

S-Type 820mm Heat Sealer

Optimax® S-Type 820mm Heat Sealer

Heavy duty impulse heat sealer with integral cutter, locking sealing bar and remote actuation option

CODE: S820

S-Type 1020mm Heat Sealer

Optimax® S-Type 1020mm Heat Sealer

Heavy duty impulse heat sealer with integral cutter, locking sealing bar and remote actuation option

CODE: S1020

S-Type Floor Stand, Foot Pedal & Film Holder

Optimax® S-Type Floor Stand, Foot Pedal & Film Holder

Holds S-Type impulse heat sealer at the optimum height for operating in a standing posture

Four models available

CODE: Various

S-Type Work Table & Bag Support

Optimax® S-Type Work Table & Bag Support

Supports large or heavy packs in position during the seal cycle

Four models available

CODE: Various

S-Type Replacement & Spare Parts

Optimax® S-Type Replacement & Spare Parts

Compatible with all of the above type Optimax® impulse heat sealers

CODE: Various

S-Type Flexible Foot Pedal

Optimax® S-Type Flexible Foot Pedal

Mechanical foot pedal enabling hands-free operation for improved productivity and ease of handling larger items

CODE: FPED

E-Type Digitally Controlled 400mm Impulse Heat Sealer

Optimax® E-Type Digitally Controlled 400mm Impulse Heat Sealer

Energy-efficient, high speed heat sealing combined with professional-level build quality and reliability

CODE: E420

E-Type Digitally Controlled 600mm Impulse Heat Sealer

Optimax® E-Type Digitally Controlled 600mm Impulse Heat Sealer

Energy-efficient, high speed heat sealing combined with professional-level build quality and reliability

CODE: E620

Vacuum Sealer Base Unit in Anodised Aluminium

Optimax® Vacuum Sealer Base Unit in Anodised Aluminium

Control unit for the V-Type vacuum impulse heat sealing system

Suitable for food, pharmaceutical and chemical industries

NB. Requires additional interchangeable 420-1320mm sealing bars (sold separately)

CODE: VI-HEAD

Vacuum Sealer Base Unit in Powder-coated finish

Optimax® Vacuum Sealer Base Unit in Powder-coated Finish

Control unit for the V-Type vacuum impulse heat sealing system

NB. Requires additional interchangeable 420-1320mm sealing bars (sold separately)

CODE: V-HEAD

V-Type Sealing Bars

Optimax® V-Type Sealing Bars

Interchangeable sealing bars for the V-Type vacuum impulse heat sealing system

Five models available

CODE: Various

Please DON'T pop the bubble wrap!

Grangewood Plastic Packaging Ltd is a company registered in England and Wales with registration number 00410048.
Registered Office - Essex House, Jutsums Lane, Romford, Essex, RM7 0ER. VAT number GB 248437343.

Site copyright ©2014-2023 Grangewood Plastic Packaging Ltd
Privacy Policy | Cookie Policy
Designed and maintained by WEBsterSITESTM